Search

Show simple item record

dc.contributor.authorDerkatch, Valery Nikolaevich
dc.coverage.spatialBrest
dc.date.accessioned2021-12-03T11:45:32Z
dc.date.available2021-12-03T11:45:32Z
dc.date.issued2021
dc.identifier.citationDerkatch, V. N. The strength and deformability of the large-format porous ceramic blocks masonry under shear / V. N. Derkatch // Vestnik of Brest State Technical University. – 2021. – № 3 (126). – P. 2–4.
dc.identifier.urihttps://rep.bstu.by/handle/data/24520
dc.descriptionВ. Н. Деркач. ПРОЧНОСТЬ И ДЕФОРМАТИВНОСТЬ ПРИ СДВИГЕ КАМЕННОЙ КЛАДКИ ИЗ КРУПНОФОРМАТНЫХ ПОРИЗОВАННЫХ КЕРАМИЧЕСКИХ БЛОКОВ
dc.description.abstractThe article presents the results of experimental studies of shear strength, shear modulus and the limit value of the angle of shear deformations of masonry made of porous ceramic blocks with groove connection system of vertical joints. Studies of these parameters were carried out by the method of diagonal compression of masonry specimens, the vertical joints of which were made without filling and with filling with mortar. It is established that when filling vertical joints of masonry with a mortar on a mineral binding material, its shear strength and shear modulus significantly increase. It is indicated that it is necessary to take these factors into account when designing wall-stiffening diaphragms, multi-loaded load-bearing walls, floor-by-floor supported walls and partitions constructing using masonry from porous ceramic blocks.
dc.language.isoen
dc.publisherBrSTU
dc.subjectmasonry
dc.subjectceramic porous blocks
dc.subjectdiagonal compression
dc.subjectshear strength
dc.subjectshear modulus
dc.subjectкаменная кладка
dc.subjectкерамические поризованные блоки
dc.subjectдиагональное сжатие
dc.subjectпрочность при сдвиге
dc.subjectмодуль сдвига
dc.titleThe strength and deformability of the large-format porous ceramic blocks masonry under shear
dc.typeСтатья (Article)
dc.identifier.udc692.21
dc.abstract.alternativeВ статье приведены результаты экспериментальных исследований прочности при сдвиге, модуля сдвига и предельного угла сдвиговых деформаций каменных кладок из поризованных керамических блоков с пазогребневым соединением вертикальных швов. Исследования данных параметров осуществлялись методом диагонального сжатия образцов каменной кладки, вертикальные швы которой были выполнены без заполнения и с заполнением раствором. Установлено, что при заполнении вертикальных швов каменной кладки клеевым раствором на минеральном вяжущем существенно возрастает ее прочность на сдвиг и модуль сдвига. Указано на необходимость учета данных факторов при проектировании стен-диафрагм жесткости, разнонагруженных несущих стен, поэтажно опертых стен и перегородок, возводимых с применением каменной кладки из поризованных керамических блоков.
dc.identifier.doihttps://doi.org/10.36773/1818-1112-2021-126-3-2-4


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record